Its simple and robust design
ensures reliable non-stop operation
of the unit. Compared to Geode
SC1100 based boards, this power-efficient
design performs 2 to 3 times
faster thanks to a MIPS 4Kc
core CPU architecture.
From the base configuration
of 3 Ethernet ports and 2 MiniPCI
slots (for wireless cards) it
can be extended by using daughterboards
for four more MiniPCI slots,
or even up to a total of 15
interfaces (9 Ethernet ports
and 6 MiniPCI slots). A wide
range of accepted input power
means that you can connect to
almost any direct current power
source you already have on site.
It also can be powered through
an Ethernet port using Power-over-Ethernet
technology (802.3af) or passive
non-standard PoE.
RouterOS and Linux (reference
Debian GNU/Linux image and source
available) can be used to operate
this board.
| |
RouterBOARD 532 |
RouterBOARD 532A |
| CPU |
MIPS 32 4Kc
based 266MHz (BIOS adjustable
from 200 to 333 MHz; 400MHz
processsor factory option)
embedded processor |
| Memory |
32MB DDR onboard memory
chip |
64MB DDR onboard memory
chip |
| Root loader |
RouterBOOT,
1Mbit Flash chip |
| Data storage |
128MB onboard
NAND memory chip
CompactFlash type I/II slot
(also supports IBM/Hitachi
Microdrive) |
| Ethernet ports
|
One IDT Korina
10/100 Mbit/s Fast Ethernet
port supporting Auto-MDI/X
Two VIA VT6105 10/100 Mbit/s
Fast Ethernet ports supporting
Auto-MDI/X |
| MiniPCI slot |
Two MiniPCI
Type IIIA/IIIB slots |
| Daughterboard connector |
Present |
| Serial ports |
One DB9 RS232C
asynchronous serial port |
| LEDs |
Power, 2 LED
pairs for MiniPCI slots,
1 user LED |
| Watchdog |
IDT internal
SoC hardware watchdog timer |
| Power options |
IEEE802.3af
Power over Ethernet: 12V
or 48V DC
Power jack/header 6..22V
or 25..56V DC jumper selectable.
PoE does not support power
over datalines |
| Dimensions |
14.0 cm x
14.0 cm (5.51 in x 5.51
in) |
| Temperature |
Operational:
-20°C to +70°C (-4°F
to 158°F) |
| Humidity |
Operational:
70% relative humidity (non-condensing) |
| Currently supported
OS |
RouterOS 2.9,
Linux 2.4 |
